Frequency of alternation

About the function

Frequency of alternation is currently not supported in PCT. What follows below is the description of the function up to PCT ver. 1.2

The occurrence of alternations can be used in assessing whether two phonemes in a language are contrastive or allophonic, with alternations promoting the analysis of allophony (e.g., [Silverman2006], [Johnson2010], [Lu2012]), though it’s clear that not all alternating sounds are allophonic (e.g., the [k]~[s] alternation in electric~electricity).

In general, two phonemes are considered to alternate if they occur in corresponding positions in two related words. For example, [s]/[ʃ] would be considered an alternation in the words [dəpɹɛs] and [dəpɹɛʃən] as they occur in corresponding positions and the words are morphologically related. [Johnson2010] make the point that alternations may be more or less frequent in a language, and imply that this frequency may affect the influence of the alternations on phonological relations. As far as we know, however, there is no literature that directly tests this claim or establishes how frequency of alternation could actually be quantified (though see discussion in [Hall2016]).

Method of calculation

In PCT, frequency of alternation [1] is the ratio of the number of words that have an alternation of two phonemes to the total number of words that contain either phoneme, as in:

\(Frequency\ of\ alternation = \frac{Words\ with\ an\ alternation\ of\ s_1\ and\ s_2} {Words\ with\ s_1\ +\ words\ with\ s_2}\)

To determine whether two words have an alternation of the targeted phonemes, one word must contain phoneme 1, the other must contain phoneme 2, and some threshold of “relatedness” must be met. In an ideal world, this would be determined by a combination of orthographic, phonological, and semantic similarity; see discussion in [Hall2016]. Within PCT, however, a much more basic relatedness criterion is used: string similarity. This is indeed what [Khorsi2012] proposes as a measure of morphological relatedness, and though we caution that this is not in particularly close alignment with the standard linguistic interpretation of morphological relatedness, it is a useful stand-in for establishing an objective criterion. If both conditions are met, the two words are considered to have an alternation and are added to the pool of “words with an alternation of s1 and s2.”

It is also possible to require a third condition, namely, that the location of phoneme 1 and phoneme 2 be roughly phonologically aligned across the two words (e.g., preceded by the same material). Requiring phonological alignment will make PCT more conservative in terms of what it considers to “count” as alternations. However, the phonological alignment algorithm is based on [Allen2014] and currently only works with English-type morphology, i.e., a heavy reliance on prefixes and suffixes rather than any other kinds of morphological alternations. Thus, it should not be used with non-affixing languages.

Again, we emphasize that we do not believe this to currently be a particularly accurate reflection of morphological relatedness, so the resulting calculation of frequency of alternation should be treated with extreme caution. We include it primarily because it is a straightforward function of string similarity that has been claimed to be relevant, not because the current instantiation is thought to be particularly valid.

Calculating frequency of alternation in the GUI

To start the analysis, click on “Analysis” / “Calculate frequency of alternation…” in the main menu, and then follow these steps:

  1. Segments: First, select which pairs of sounds you want the functional load to be calculated for. Do this by clicking on “Add pair of sounds”; the “Select segment pair” dialogue box will open. The order that the sounds are selected in is irrelevant; picking [i] first and [u] second will yield the same results as picking [u] first and [i] second. Once sounds have been selected, click “Add.” Pairs will appear in the “Functional load” dialogue box. See more about interacting with the sound selection box (including, e.g., the use of features in selecting sounds and the options for selecting multiple pairs) in Sound Selection.

  2. String similarity algorithm: Next, choose which distance / similarity metric to use. Refer to Method of calculation for more details.

  3. Threshold values: If the Khorsi algorithm is selected, enter the minimum similarity value required for two words to count as being related. Currently the default is -15; this is an arbitrary (and relatively low / non-conservative) value. We recommend reading [Khorsi2012] and examining the range of values obtained using the string similarity algorithm before selecting an actual value here. Alternatively, if one of the edit distance algorithms is selected, you should instead enter a maximum distance value that is allowed for two words to count as being related. Again, there is a default (6) that is relatively high and non-conservative; an understanding of edit distances is crucial for applying this threshold in a meaningful way.

  4. Tier: The tier from which string similarity is to be calculated can be selected. Generally, one is likely to care most about full transcriptions, but other tiers (e.g., a vowel tier) can also be selected; in this case, all information removed from the tier is ignored.

  5. Pronunciation variants: If the corpus contains multiple pronunciation variants for lexical items, select what strategy should be used. For details, see Pronunciation Variants. Note that here, the only choices currently available are canonical or most-frequent forms.

  6. Frequency Type: Next, select which frequency type to use for your similarity metric, either type or token frequency. This parameter is only available if using the Khorsi similarity metric, which relies on counting the frequency of occurrence of the sounds in the currently selected corpus; neither edit distance metric involves frequency.

  7. Minimal pairs: Then, select whether you wish to include alternations that occur in minimal pairs. If, for example, the goal is to populate a list containing all instances where two segments potentially alternate, select “include minimal pairs.” Alternatively, if one wishes to discard known alternations that are contrastive, select “ignore minimal pairs.” (E.g., “bat” and “pat” look like a potential “alternation” of [b] and [p] to PCT, because they are extremely similar except for the sounds in question, which are also phonologically aligned.)

  8. Phonological alignment: Choose whether you want to require the phones to be phonologically aligned or not, as per the above explanation.

  9. Corpus size: Calculating the full set of possible alternations for a pair of sounds may be extremely time-consuming, as all words in the corpus must be compared pairwise. To avoid this problem, a subset of the corpus can be selected (in which case, we recommend running the calculation several times so as to achieve different random subsets for comparison). To do so, enter either (1) the number of words you’d like PCT to extract from the corpus as a subset (e.g., 5000) or (2) a decimal, which will result in that percentage of the corpus being used as a subset (e.g., 0.05 for 5% of the corpus).

  10. Output alternations: You can choose whether you want PCT to output a list of all the words it considers to be “alternations.” This is useful for determining how accurate the calculation is. If you do want the list to be created, enter a file path or select it using the system dialogue box that opens when you click on “Select file location.” If you do not want such a list, leave this option blank.

An example of selecting the parameters for frequency of alternation, using the sample corpus:

_images/freqaltdialog.png
  1. Results: Once all options have been selected, click “Calculate frequency of alternation.” If this is not the first calculation, and you want to add the results to a pre-existing results table, select the choice that says “add to current results table.” Otherwise, select “start new results table.” A dialogue box will open, showing a table of the results, including sound 1, sound 2, the total number of words with either sound, and total number of words with an alternation, the frequency of alternation and information about the specified similarity / distance metric and selected threshold values, and the selected option with respect to pronunciation variants. To save these results to a .txt file, click on “Save to file” at the bottom of the table.

An example of the results table:

_images/freqaltresults.png

To return to the function dialogue box with your most recently used selections, click on “Reopen function dialog.” Otherwise, the results table can be closed and you will be returned to your corpus view.

1

As emphasized throughout this section, the algorithm implemented in PCT is an extremely inaccurate way of calculating frequency of alternation, and should be used only with a full understanding of its severe limitations.

Classes and functions

For further details about the relevant classes and functions in PCT’s source code, please refer to Frequency of alternation.